SENNHEISER EM 6000

Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways.

Specifications:

Audio output
Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit
Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
Can be externally synchronized using WCLK loop-through with BNC sockets
Analog Audio Outputs: XLR-3 and 6.3 mm jack per channel (transformer balanced)
-10 dBu to +18 dBu in steps of 1 dB (2 kΩ)
Dimensions
44 x 483 x 373 mm
Frequency response
30 Hz – 20 kHz (1.5 dB)
THD, total harmonic distortion
< 0.03 % (@ 1 kHz)
Weight
Approx. 5.2 kg
Power consumption
Max. 35 W
Storage temperature
-25°C to +70°C
Operating temperature
-10°C to +50°C
Switching bandwidth
244 MHz
Power supply
100 – 240 V AC, 50/60 Hz
Antenna connector
Input 2x BNC (50 Ω), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 Ω)
Codecs
SePAC (Sennheiser Performance Audio Codec)
Dynamic range
111 dB (A) type
Frequency range
470 – 714 MHz
Headphone output level
6.3 mm jack, 2x 100 mW at 32 Ω
Image rejection
> 100 dB typ.
Sensitivity
-100 dBm typ.
Word clock
Input: BNC, 75 Ω
Output: BNC, 75 Ω
Sampling Rates: 48 kHz, 96 kHz
Operating relative humidity
Operation: Max. 85% at 40°C (non-condensing)
Storage: Max. 90% at 40°C (non-condensing)
Transmission method
Digital modulation, “LR” mode Min. frequency spacing for equidistant grid: 325 kHz
Latency
Analog Audio Out: 3 ms
Digital Audio Out: 3 ms (AES/EBU)
Audio codec
SeDAC (Sennheiser Digital Audio Codec)
Network protocol
IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection
Receiver Principle
Double superheterodyne
Diversity principle
True bit diversity
Encryption
AES 256
Daisy chain outputs
2x BNC (50 Ω) 0 dB +/- 0.5 dB amplification relative to antenna inputs
Receiving channels
2
Daisy-chained receivers (RF)
Max. 8 EM 6000 units
Power plug
3-pin, protection class I as per IEC/EN 60320-1
Water Protection Code
The product must not be exposed to dripping and splashing (IP2X)